beautypg.com

Calc‘n‘clean – Siemens TK76K573 User Manual

Page 54

background image

52

de

en

Press start

Press

start stop (8). The cleaning pro­

gramme will now run for about 6 minutes.

Cleaning
Empty drip tray

Empty the drip tray.

Replace drip tray

Replace the drip tray.

The appliance is ready for use again.

Calc‘n‘Clean

Important: If there is a ilter in

the water tank (12), it needs to

be removed before the service

programme is run and should only

be replaced once the programme

is inished.

Calc‘n‘Clean combines the separate func­

tions of descaling and cleaning. If the two

programmes are both due to run soon, the

fully automatic espresso machine suggests

this service programme automatically.

If the prompt

Service - Calc‘n‘Clean

is

displayed, press and hold down

i

(7) for

at least three seconds. The display shows:

Please press ‘Start/Stop’ to begin...
Calc‘n‘Clean

or

To start without the prompt (see “Displaying

Settings”) press and hold down

i

(7) for

at least three seconds and select

Please press ‘Start/Stop’ to begin...
Calc‘n‘Clean

Press

start stop (8). The display

will guide you through the programme.

Empty drip tray

Empty the drip tray (20).

Replace drip tray

Replace the drip tray.

If the milk frother is not inserted,

the following message is

displayed:

Set up milk frother

Insert the milk frother (10).

Place container under milk frother

» Start

Place a container with a capacity of

at least one litre under the milk frother

(10).

Press

start stop (8). The appliance

rinses twice.

The coffee grounds container (26)

can also be used. To avoid splut­

tering, push the coffee outlet (9)

down fully.

Cleaning
Open drawer

Deploy the appliance and open the

drawer (17).

Insert cleaning tablet! Close drawer!

Drop a cleaning tablet in the drawer and

close the drawer again.

The cleaning programme will now run

for about 1 minute.

If the water ilter is activated, the

following message is displayed:

Remove filter » Start

Remove the water ilter and press

start stop (8).

Add 0.5 l water and descaler » Start

Pour lukewarm water into the empty

water tank (12) up to the

calc (0.5 litre)

mark and dissolve two descaling tablets

in it. Press

start stop (8).

The descaling programme now runs for

about 24 minutes:

Descaling

TK76K573_Heft1.indb 52

25.11.2011 16:02:12