Siemens TK76K573 - Manual (Page 37)

35
de en
Controls and display
Power switch O/I
The power switch O/I (1) is used to switch
the appliance on into “energy saving mode”
or to switch it off fully (power supply off). In
“energy saving mode” only the on off but­
ton (2) is lit in white.
1
Important: Do not press the
power switch while the appliance
is operating. The appliance should
only be switched off when it is in
“energy saving mode”, so that it
can rinse automatically.
Menu and display
The appliance features user­friendly menu
navigation to ensure that operation is as
easy as possible while at the same time
offering a wide range of functions. It allows
you to select from a multitude of options in
only a few steps once you know how. The
display shows which programme you have
selected and lets you know when you need
to top up the appliance with water or coffee,
or run one of the service programmes.
Basic menu operation is described in the
following pages.
...
2 6 3 4 3 7 8
5
- + - +
1x 1x
Coff ee
► on off (2): This button is used to
switch on the appliance or put it into
“energy saving mode”. The appliance
then rinses, unless
– it is still warm when switched on;
– no coffee was dispensed before it was
switched to “energy saving mode”.
The appliance is ready for use when
the drink selection menu is shown in the
display (5).
Even when in “energy saving
mode” the appliance recognizes
when the drip tray unit (20) has
been removed.
► < > (3): These buttons are used
to navigate left and right in the display
(5). The currently active menu item is
highlighted in white.
TK76K573_Heft1.indb 35 25.11.2011 16:01:50