Siemens TK76K573 - Manual (Page 43)

41
de en
Do not use whole beans or instant
coffee.
4. Close the drawer again.
5. Push the appliance back in.
6. Set the required drink and per­cup
quantity with the rotary knob (4):
+ Espresso
Coff ee powder
7. Place a cup under the coffee outlet (9).
9
8. Press start stop (8).
The coffee is brewed and then dispensed
into the cup.
For another cup of coffee, pour in more
ground coffee and repeat the procedure. If
no coffee is taken within 90 seconds, the
brewing chamber empties automatically to
avoid overi lling. The appliance rinses.
Preparation using milk
For optimal milk froth, use cold
milk with a fat content of at least
1.5 % if possible.
1. Lower the cover of the milk frother (11);
the milk frother (10) is now accessible:
11
10
2. Deploy the appliance
(see “Deployment system”).
3. Take the milk tube supplied with the ap­
pliance and connect it to the attachment
point on the milk frother (10). Close the
cover again.
13
10
13
13
10
13
4. Push the appliance back in.
5. Place the container with milk next to
the milk frother. Introduce the milk tube
into the container. The notched end of
the tube should be fully immersed in the
milk.
6. Place a cup or glass under the coffee
outlet.
7. Turn the rotary knob (4) to select
Latte Macchiato , Cappuccino ,
White coffee or My coffee (your own
special coffee/milk mix). The display
shows the selected drink along with the
setting for coffee strength and per­cup
quantity for this drink:
1x * 1x
+
Cappuccino
8. Choose your settings for strength and
per­cup quantity.
9. Press start stop (8).
First milk is drawn in, prepared and
dispensed into the cup or glass.
TK76K573_Heft1.indb 41 25.11.2011 16:01:57