Siemens TK76K573 - Manual (Page 39)

37
de en
Deployment system
The appliance can be pulled out of the built­
in unit automatically. To do this,
► press (6) (appliance must be
switched on for this) or
► remove grate and pull on the handle
underneath which is now accessible:
The appliance now moves automatically
into deployment position 1. In this position
it can be i lled with water, coffee beans,
ground coffee and cleaning / descaling
tablets, and the accessories on the right of
the appliance can be removed.
To pull the appliance out fully,
► press (6) again and pull the appli­
ance out by hand into position 2 or
► pull the appliance out fully by the
handle.
In deployment position 2 the brewing unit
can be removed and the grinding unit
adjusted.
Deployment Deployment
position 1 position 2
Then push the appliance back fully into the
built­in unit.
During the brewing process,
automatic deployment is
prevented.
Accessories
The fully automatic espresso machine has
special compartments for storing the acces­
sories and quick reference guide (21) with
the appliance. These are located on the
right side (13, 14) and are accessible when
the appliance is pulled out into deployment
position 1.
Operation
General
Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma­
chines. Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit.
If the appliance is being used for the i rst
time or has not been operated for a long
period, the i rst cup of coffee will not have
the full aroma. When using the espresso
machine for the i rst time, you will achieve a
suitably thick and stable “crema” only after
the i rst few cups have been dispensed.
The factory settings of the fully automatic
espresso machine are programmed for op­
timal performance. The appliance switches
to “energy saving mode” automatically after
one hour. This setting, like many others,
can be changed (see “Auto off after” under
“Displaying settings”).
Important:
Only use the appliance in frost­
free rooms. If the appliance has
been transported or stored at tem­
peratures below 0 °C, wait at least
3 hours before operation.
TK76K573_Heft1.indb 37 25.11.2011 16:01:52