beautypg.com

Matrix Orbital GLK12232-25-SM Legacy User Manual

Page 31

background image

8.1.2 Set Contrast (254 80 [contrast])

This command sets the display’s contrast to [contrast], where [contrast] is a value between 0x00 and

0xFF (between 0 and 255). Lower values cause ’on’ elements in the display area to appear lighter, while

higher values cause ’on’ elements to appear darker.

Lighting conditions will affect the actual value used for optimal viewing. Individual display modules

will also differ slightly from each other in appearance. In addition, values for optimal viewing while the

display backlight is on may differ from values used when the backlight is off.

8.1.3 Set Contrast and Save (254 145 [contrast])

This command works in exactly the same way as the "Set contrast" command. The only difference is

it saves the contrast value in the memory of the module, whereas, the previous command only changes the

value for the duration of use.

8.1.4 Backlight On (254 66 [minutes])

This command turns on the backlight for a time of [minutes] minutes. (This specifies how long the

backlight will remain on after receipt of the command). If [minutes] is zero (0), the backlight will remain on

indefinitely.

NOTE Backlight is always on by default on power up.

8.1.5 Backlight Off (254 70)

This command turns the backlight of the display off.

8.1.6 Set Backlight brightness (254 153 [brightness])

This commands sets the display’s backlight brightness to [brightness], where [brightness] is a value

between 0x00 and 0xFF (between 0 and 255). Lower values will cause the backlight intensity to “dim”,

while higher values cause the backlight’s intensity to “brighten”.

8.1.7 Set Backlight brightness and save (254 152 [brightness])

This commands sets the display’s backlight brightness to [brightness] and saves it, where [brightness]

is a value between 0x00 and 0xFF (between 0 and 255). Lower values will cause the backlight intensity to

“dim”, while higher values cause the backlight’s intensity to “brighten”. Once this command has been sent,

[brightness] will be set accordingly on additional power ups.

Matrix Orbital

GLK12232-25-SM

27