Horner APG XLt OCS HE-GSM04 - Manual (Page 59)

MAN4005-04-EN GPRS / GSM MODEM Configuration PAGE 59
25. %CGPCO Set Type of Authentication, Username and Password
%CGPCO Set Type of Authentication, Username
and Password
Command Function This command sets the type of Authentication, username and password for
GPRS context activation.
Command Functional
Group Enfora Specific
Command Format Query
Response AT%CGPCO=?
%CGPCO: 0,(0-251),(1-2)
OK
Write Format
Response
AT%CGPCO=,
“”,
OK
Read Format
Response AT%CGPCO?
CGPCO: 0,"",1
CGPCO: 0,"",2
OK
AT%CGPCO?
CGPCO: 1,"",1
CGPCO: 1,"",2
OK
Execution Format
Response N/A
N/A
Parameter Values
0 - Inputs specified in Hexadecimal
1 - Inputs specified in ASCII
Authentication data (ASCII) , where
Username: Maximum 64 bytes ASCII string.
Password: Maximum 64 bytes ASCII string.
Authentication data (Hexadecimal):
Protocol Configuration Option specified in Hex value; maximum size is equal
to 251 bytes.
0 – The new username and password is to be applied to all context Activation.
1 – The new username and password is to be applied to Context identifier 1.
2 – The new username and password is to be applied to Context identifier 2.
Notes If %CGPCO is set with the input format of 0 (hexadecimal), then the setting of
AT%CGPPP will be ignored.
Username and Password are case sensitive.
%CGPCO Set Type of Authentication, Username and Password (continued)
Example:
Example of ASCII input parameters:
AT%CGPCO=1, “username, password”, 1
AT%CGPCO?
CGPCO: 1,"username,password",1
(PAP:80C023160101001608757365726E616D65087061737 776F726480211001010010810600000000830600000000)
Example of Hex input parameters:
AT%CGPCO=0, “80C023160101001608757365726E616D650870617373
776F726480211001010010810600000000830600000000”, 1
Page 59 of 62 ECN # 956