Horner APG XLt OCS HE-GSM04 - Manual (Page 56)

PAGE 56 GPRS / GSM MODEM Configuration MAN4005-04-EN
20. $PADBLK PAD Block Size
$PADBLK PAD Block Size
Command Function This command allows the user to query/set the PAD block size.
Command Functional
Group Enfora Specific
Command Format Query
Response AT$PADBLK=?
PADBLK: (3-512)
OK
Write Format
Response AT$PADBLK =<block size >
OK
Read Format
Response AT$PADBLK?
$PADBLK: <block size>
Execution Format
Response N/A
N/A
Parameter Values
PAD data will be created at the requested
PAD block size (number of bytes) unless an enabled forward character or PAD
timeout forces the data to be sent out at a smaller block size. Block size does
NOT include the IP or TCP/UDP header size.
21. $PADFWD PAD Forward Character
$PADFWD PAD Forward Character
Command Function This command allows the user to query/set the PAD forward character. If PAD
forward is enabled via AT$PADCMD, receipt of this character will immediately
forward all currently buffered PAD data.
Command Functional
Group Enfora Specific
Command Format Query
Response AT$PADFWD =?
$PADFWD: (0-ff)
OK
Write Format
Response
AT$PADFWD =<forward character>
OK
Read Format
Response AT$PADFWD?
$PADFWD: <forward character>
Execution Format
Response N/A
N/A
Parameter Values
Hex representation of user selected forward character. Default forward character
is 0D (Carriage return).
Page 56 of 62 ECN # 956