Horner APG XLt OCS HE-GSM04 User Manual
Gsm/gprs, User manual: gsm/gprs modem configuration
This manual is related to the following products:
Table of contents
Document Outline
- GSM/GPRS Modem Configuration
- GSM Modem
- 1 GSM Functionality
- 2 GPRS (General Packet Radio Service) Functionality
- 3 Data Transmission Settings
- 4 Data Transfer using Communication Blocks
- 5 SMS Communications
- 5.1 Overview
- 5.2 SMS Configuration
- 5.2.1 GSM Modem Settings – SMS Configuration
- 5.2.2 COM Port Settings
- 5.2.3 SMS Target Directory Settings
- 5.2.4 New Contact Information
- 5.2.5 Incoming Messages Settings (RECEIVE): (Messages sent from Groups to the controller)
- 5.2.6 Outgoing Messages Settings (SEND):(Messages sent from the controller to Groups)
- 5.2.7 SMS Message Configuration
- 5.2.8 Insert Value Field
- 5.2.9 SMS Send Message
- 5.2.10 Rules for SMS Send and Receive Messages
- 6 GPRS / GSM Modem Specifications
- 7 Installation / Safety
- 8 Technical Support
- 9 Appendix
- A. SIM Card Features
- B. AT Command Set
- 1. ATD Dial command
- 2. AT+CBST Select Bearer service type
- 3. AT+CREG Network Registration Info
- 4. AT+COPS Operator Selection
- 5. AT+CPIN Enter PIN
- 6. AT+CSQ Signal Quality and Bit Error Rate
- 7. AT+CMGF SMS Format
- 8. AT+CSCA Service Center Address - Message Configuration Commands
- 9. AT+CSMP Set Text Mode Parameters
- 10. AT+CNMI New Message Indication to TE - Message Receiving and Reading Commands
- 11. AT+CMGL List Messages
- 12. AT+CMGR Read Message
- 13. AT+CMGS Send Message - Message Sending and Writing Commands
- 14. AT+CMGD Delete Message
- 15. +CGDCONT Define PDP Context
- 16. $UDPAPI Modem API Address - UDP API Commands
- 17. PAD Commands
- 18. $PADSRC PAD Source Port
- 19. $ACTIVE TCP PAD State
- 20. $PADBLK PAD Block Size
- 21. $PADFWD PAD Forward Character
- 22. $PADTO PAD Timeout Value
- 23. DP Dial Command for UDP PAD
- 24. DT Dial Command for TCP PAD
- 25. %CGPCO Set Type of Authentication, Username and Password
- 26. $AREG Auto Registration
- 27. $HOSTIF Configure Host to Modem Interface