Horner APG XLt OCS HE-GSM04 - Manual (Page 58)

PAGE 58 GPRS / GSM MODEM Configuration MAN4005-04-EN
24. DT Dial Command for TCP PAD
DT Dial Command for TCP PAD
Command Function This command is used to invoke the TCP PAD via a dial command.
Command Functional Group Enfora Specific
Command Format Query
Response N/A
N/A
Write Format
Response
atdt /
Connect
Read Format
Response N/A
N/A
Execution Format
Response N/A
N/A
Parameter Values
IP Address of the destination host.
TCP Port number. If no TCP port number is required, a value zero (0) should be
specified here.
Notes This command will override the AT$PADDST settings for the current connected
session.
Example: atdt123.456.789.1/0
atdt123.456.789.2/3000
Page 58 of 62 ECN # 956