Ashcroft GC35 - Pressure Sensor User Manual
Page 18
18
15. Maintenance and Warranty
Periodic Inspection
Depending upon the type of use periodic inspection is recommended at least once a year.
Please refer to the following items for periodic inspection.
1. Appearance
2. Display/output check via appropriate pressure standard
(1)
3. Display/output check via Loop Check
(2)
CAUTION
• Avoid electrostatic charging. When cleaning this product, please use a soft, damp cloth.
• Do not use thinner, etc. which may cause deterioration and failure.
Product warranty
Except as otherwise provided, the product warranty of this product is as follows:
Period: 12 months after delivery
Warrantable defects: Defects resulting from the design and manufacture of our company,
the quality of the material, etc.
Implementation of warranty: This warranty will be completed by substitution or repair of
the product concerned.
Consequential damages caused by product defects are not the responsibility of the
manufacturer.
• If you have any questions about this document, please contact the sales office or distributor
nearest you.
• This document is subject to change without notice due to upgrade, etc.
(1) If zero correction is required refer to section 12.
(2) Loop check, see section 10.