Wagner ProCoat - Manual (Page 8)

English 8
2. Load
Material
You will need:
• The material you plan to spray
• Extension cord
• Waste bucket
1. Push the red inlet release
button to ensure proper inlet
valve operation.
4. Hold return tube over waste
bucket until material is flowing
(approximately five seconds).
5. Turn power OFF.
2. Unclip the suction hose and return tube.
Place suction hose into material container (a).
Place return tube into a waste bucket (b).
6. Place return tube into material container
and clip tube and suction hose together.
3. Plug in the sprayer. Turn the
PRIME/SPRAY knob to PRIME.
Turn the power ON.
1 3 2
PRIME
l
O
ON
l
O
4 5 6
OFF
(a)
(b)