Clean the spray gun filter, 13 clean the spray gun filter, Safety – Wagner ProCoat User Manual

Page 13: Spraying troubleshooting, Clean the spray gun filter you will need

English

Safety

Spraying

troubleshooting -

clean the Spray

Gun Filter

You will need:

• Wrench

• Warm, soapy water for latex material

• Mineral spirits for oil based materials

• Replacement spray gun filter (if

necessary)

IMPoRtAnt: never clean the filter by

poking it with a sharp object.

1. Peform the Pressure Relief

Procedure, page 7.

5. Inspect the filter for

damage. Replace if any

holes or tears are found.

4. Remove the filter from the housing.

Clean with appropriate cleaning

solution (warm, soapy water for

latex materials; mineral spirits for

oil-based materials).

2. Pull trigger guard from filter

housing.

6. Replace cleaned filter, tapered end

first, into the gun housing.

note: It is important to place

tapered end first to ensure proper

sprayer operation.

3. Unscrew the filter housing using a

wrench.

7. Reassemble the spray gun.

PRIME