Clean the inlet filter, 14 clean the inlet filter, Safety – Wagner ProCoat User Manual

Page 14: Spraying troubleshooting, Clean the inlet filter you will need

English

Safety

Spraying

troubleshooting -

clean the

Inlet Filter

You will need:

• Warm, soapy water for latex material

• Mineral spirits for oil based materials

IMPoRtAnt: Make sure your floors and

furnishings are covered with drop cloths to

prevent accidental drips.

1. Unscrew the inlet filter from the fitting on the end of the

suction tube.

3. Replace the cleaned filter by threading it back into the

fitting on the end of the suction tube.

2. Clean the filter using the appropriate cleaning solution

(warm, soapy water for latex materials, mineral spirits

for oil-based materials).