Wagner Power Painter Pro with EZ Tilt - Manual (Page 7)

English
© Wagner Spray Tech - All Rights Reserved 7
Remote Suction Hose Setup (optional)
Recommended for medium to large jobs
A 75% duty cycle is recommended when spraying with
the remote suction hoses. For example, trigger the gun
for 15 seconds, and then allow the gun to remain idle
(untriggered) for 5 seconds.
IMPORTanT: avoid running the container dry. an
empty container will allow air to get sucked into the
sprayer, which leads to globbing and spitting.
IMPORTanT: always
make sure the tip nut is
tightened securely prior
to spraying.
Remote Suction Hose Setup:
1. Remove the cup -
See steps 1-2, previous page.
2. Twist and remove the suction tube and filter assembly.
3. Attach the housing to the bottom of the sprayer as
shown.
Rotate the housing until it clicks into place.
4. Attach lid to paint container.
Push hoses through the holes in the lid and down to
the bottom of the material container.
1
2
3
4