MagTek MICRImage - Manual (Page 36)

MICRImage Check Reader
28
TG – TIFF TAGS COMMAND
This command stores the specified data in the tag section of the TIFF file for the last image scanned. The
following optional parameter may be used repeatedly:
Tn=string] Set tag n to “string”.
Example: TG T315=Fred] T337=Laserjet
An existing tag can be deleted by setting it to a null string as follows:
TG T315=] will delete Tag 315. All user tags are deleted when a new document is scanned or an
image is saved.
If this command is used without parameters, the current tags are listed.
Example: TG may return:
271 MagTek, Inc.
272 MICRImage RS232 (12345678)
305 Version MI_00.00.00
Note
If the image is “locked” (see TI command), the TG command with
parameters is ignored and will return an error.
The TIFF format allows multiple strings under the same Tag #. The strings are separated by ‘^’ as
follows:
TG T337=TED^FRED^JOE]
These separators are converted to ASCII NUL in the Tag.
TI – TRANSMIT IMAGE COMMAND
This command instructs the MICRImage to transmit the current image just captured using the image
transfer options selected in SWE. To execute, send: TI.
The following optional parameters may occur in any order:
C0 Transmit image through the host RS232 port
C1 Transmit image through the auxiliary RS232 port