MagTek MICRImage - Manual (Page 25)

Section 2. Configuration Commands
17
Enhanced Reading (ER)
This option is available only in units manufactured after 9/01/03.
If ER is selected, the document is scanned three times: forward, reverse, and forward. The
MICR lines produced are compared character by character and mismatches replaced by ‘?’. The
resulting MICR line is the one that will be parsed, formatted, and transmitted.
In the first mode, the first forward scan is compared to the reverse scan and the result is
transmitted. In the second mode, the three lines are compared in pairs and the first pair found
that matches perfectly is transmitted. In the third mode, all three MICR lines are compared and
the result transmitted.
Transfer Progress Messages
If the Transfer Progress Messages function is selected, the following messages will be sent to the
host indicating the progress of network communications.
DIAL -Dialing
NETLOG
-Logging into network
NETCOM -Connected to network
FTPLOG -Logging into FTP server
FTPCON -Connected to FTP server
DISCON -Disconnected
F=filename -file being transferred