Appendix c. troubleshooting guide, Requirements, Set-up – MagTek MINI MICR WEDGE User Manual
Page 51: Procedure, Auxiliary on-us field, Pendix c. troubleshooting guide
43
APPENDIX C. TROUBLESHOOTING GUIDE
REQUIREMENTS
• Personal Computer.
• Interface Cable, Mini DIN 6 pin, Part Number 22517501 or
Interface Cable, Large DIN 5 pin, Part Number 22517503
• AC adapter, P/N 64300050.
• Sample checks, P/N 96530005.
• A small bottle of compressed air.
• A cleaning card, P/N 96700006.
SET-UP
1. Install the MICR Reader as described in Section 2, Installation.
2. On the PC, go to the DOS prompt or any other PC application that accepts and displays
keyboard input (e.g., the MICRbase Setup Program). Observe data from the MICR Reader
throughout the procedure described below.
3. Start the Troubleshooting procedure at Step 00.
PROCEDURE
00
Check LED Indicator
Check the status of the LED indicator:
◊ off, continue to step 01.
◊ green, continue to step 02.
◊ blinking red, continue to step 11.
◊ blinking green, continue to step 17.
◊ blinking red/green, continue to 12.
◊ red or orange, continue to step 18.