MagTek MINI MICR WEDGE - Manual (Page 19)

Section 4. Commands
11
Table 4-2. Error and Status Codes
PRIORITY CODE TYPE DESCRIPTION
9 01 Error No MICR data: no transit and no account found
8 09 Status Mexican check
7 08 Status Canadian check
6 05 Error Transit error: No transit, bad character, bad length,
bad check digit
5 07 Error Account error: No account, bad character
4 04 Error Check # error: Bad character in check number
4 04 Status No check number
3 03 Status Low MICR signal, good read
2 10 Status Business check
1 11 Status Amount field present
0 00 Status No error, check OK
Notes:
•
The LED will turn red on all error conditions.
•
The absence of a check number is not considered an error.
•
If a multiple error condition occurs, the error or status code with the highest priority is
reported.
•
All unreadable MICR characters are transmitted as a “?” ASCII character (hex 3F), except for
Format 00xx (See Appendix A).
Keypad Type
The Keypad selection is for the Wedge NCR only. The selection is the calculator type of layout or
telephone layout. Both are shown in Figure 4-1.
Telephone Calculator
Figure 4-1. Keypad Types
1 2 3
7 8 9
4 5 6
0
4 5 6
1 2 3
7 8 9
0