MagTek IntelliStripe65 99875339 - Manual (Page 14)

IntelliStripe 65, USB/RS-232 Insertion Reader
6
RS-232 INTERFACE
The device can communicate to the host through an RS-232 interface. Once the host
communicates to the device on this interface the device will no longer be able to communicate
on any other interface until it is power cycled or reset. The device uses 8 data bits, 1 stop bit,
even parity. The device can automatically sync to baud rates 9600, 14400, 19200, 28800, 38400,
57600 and 115200. See MCP Driver Reference Manual (P/N 99875164), MCP Serial Transport
Protocol Reference Manual (P/N 99875163) and IntelliStripe 65 Command Reference Manual
(P/N 99875161) for more details.
USB INTERFACE
The device can communicate to the host through a USB interface. It is compliant with the USB
2.0 full-speed device specification and is compatible with any host that is compliant with USB 1,
2 or 3.
Once the host communicates to the device on this interface the device will no longer be able to
communicate on any other interface until it is power cycled or reset. The device uses vendor
identifier 0801 (hex) and product identifier 000A (hex). The device contains a manufacturer
string descriptor with a value of “MagTek”. The device contains a product string descriptor with
a value of “IntelliStripe 65”. The device contains a programmable serial number string
descriptor. The device does not get its power from the USB port; it needs to be self powered.
When using the USB port, power must be applied directly to the PCB via the power connector or
the host connector. See MCP Driver Reference Manual (P/N 99875164), MCP Serial Transport
Protocol Reference Manual (P/N 99875163) and IntelliStripe 65 Command Reference Manual
(P/N 99875161) for more details.
SPECIFICATIONS
Specifications for the Reader are listed in Table 1-1.