MagTek IntelliStripe65 99875339 - Manual (Page 12)

IntelliStripe 65, USB/RS-232 Insertion Reader
4
STANDARD FEATURES
Standard features of the IntelliStripe 65 are as follows:
•
Multiple bezel styles allow for optimized mounting and integration
•
Rugged–High impact plastic with read head attached to beam mount
•
Vandal Resistant–Open chassis design provides superior debris clearing; half-card drop-
out allows half-size credit cards and coins to be cleared from insert channel
•
On board SAM (Security Access Module)
•
RS232 and USB interfaces
•
On board intelligence for transporting large blocks of data using a defined protocol and
command set
•
Test LED
•
Program Flash upgradeable
OPTIONS
Any of these options may be selected:
•
Smart Card Contacts (8) for reading ISO contact locations
•
Front Card Gate prevents coins, dust, moisture, and debris, from entering the unit–opens
only when ISO-size card enters the unit
•
Card Latch physically latches the card inside the Reader ensuring optimum conditions for
a smart card interface session
•
Power-Fail Latch Release Mechanism–In case of a power failure, the latch releases the
card automatically (requires external capacitor)
•
On board Contactless Smart Card support
•
Drivers available for all Windows Operating System platforms
SMART CARD INTERFACE
The Reader supports ISO7816 T=0 and T=1 cards not requiring V
PP
, with a speed range of 9600
bps to 115200 bps. It also supports a variety of common memory card types. See
IntelliStripe 65 Command Reference Manual (P/N 99875161) for more details.
MAGNETIC STRIPE READER
The Reader can read up to three tracks of magnetic stripe card data. The Mag-stripe can be
configured to support all popular track combinations. See IntelliStripe 65 Command Reference
Manual (P/N 99875161) for more details.