MagTek IntelliStripe65 99875339 - Manual (Page 11)

Section 1. Features and Specifications
3
ACCESSORIES
Other part numbers that may be shipped with the unit include the following:
Part
Number
Description
16051408
RS232 / Power cable
− 6 foot, IntelliStripe 65 host port to 9-pin D female RS232 and 2.5mm
power jack
16051433 USB-A to USB mini-B cable (gray)
30037472 Demo Software, IntelliStripe Picture Demo (CD)
30037473 MagTek MCP Drivers (CD)
51300004 OTI Contactless communication module (mounts on “Contactless Ready” models
51300005 OTI Contactless antenna with LEDs (must be mounted away from IntelliStripe 65 bezel)
51300006 OTI coax antenna cable – 30cm (does not support LEDs)
51300007 OTI ribbon antenna cable – 19cm (supports LEDs)
51300012 Same as 51300004 but with SAM socket
64300080
Power Supply – Auto-ranging 100V-250V, regulated, 12VDC, 2.5mm plug. Requires adapter
to mate with power outlet; use Adapter/Power Cord (P/N 71100001) for North American
applications.
71100001
Power Outlet Adapter/Cord for North American applications (used with part number
64300080)
99510015 Demo Software, IntelliStripe Picture Demo (Web – ref www.magtek.com)
99510016 MagTek MCP Drivers (Web – ref www.magtek.com)
RELATED DOCUMENTS
This document (P/N 99875339) is from a hardware perspective only. Other MagTek documents
that cover the command set, communications protocol, and API (Application Program Interface)
are as follows:
Part Number Description
99875161 IntelliStripe 65, Command Reference Manual
99875163 MCP, Serial Transport Protocol Reference Manual
99875164 MagTek Communication Protocol, Driver Reference Manual
ISO Documents: 7810, 7811, 7816 are available from ANSI at:
Phone: 212-642-4900 or
www.ansi.org