MagTek USB MagnePrint Swipe Reader with Encryption - Manual (Page 48)

USB MagnePrint Swipe Reader with Encryption
40
ES PROPERTY (KB)
Property ID: 22 (0x16)
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x3F ‘?’
Description: This character is sent as the end sentinel for all tracks with any format. If the
value is 0 no character is sent. If the value is in the range 1 – 127 then the
equivalent ASCII character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
FS PROPERTY (KB)
Property ID: 35 (0x23)
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x7C ‘|’
Description: This character is sent as the field separator to delimit additional data
(MagnePrint info, device info, DUKPT info, etc.). If the value is 0 no
character is sent. If the value is in the range 1 – 127 then the equivalent
ASCII character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.