MagTek USB MagnePrint Swipe Reader with Encryption - Manual (Page 12)

USB MagnePrint Swipe Reader with Encryption
SPECIFICATIONS
Table 1-2 lists the specifications for the USB Swipe Reader. Figure 1-2 shows the dimensions
for the Reader.
Table 1-2. Specifications
Reference Standards ISO 7810 and ISO 7811/ AAMVA*
Power Input 5V From USB bus
Recording Method Two-frequency coherent phase (F2F)
Message Format ASCII
Card Speed 4 to 60 ips (10.1 to 152.4 cm/s)
ELECTRICAL
Current
Normal
Mode
(including power-up)
Suspend
Mode
100mA maximum
500uA maximum
MECHANICAL- Full Size
Dimensions Length 6.50” (165.1mm)
Width 1.74” (44.2mm)
Height 1.50” (38.1mm)
Weight 6.5 oz. (184.3 gr)
Cable length 6 ft.
Connector USB Type A plug
ENVIRONMENTAL
MECHANICAL – Mini
Dimensions
Length 3.94” (100.0mm)
Width 1.28”
(32.5mm)
Height 1.23” (31.3mm)
Weight 4.7 oz. (133.2 gr)
Cable length 6 ft.
Connector USB Type A plug
Temperature
Operating 0 °C to 70 °C (32
o
F to 158
o
F)
Storage -40
o
C to 70
o
C (-40
o
F to 158
o
F)
Humidity
Operating 10% to 90% noncondensing
Storage 10% to 90% noncondensing
Altitude
Operating
0-10,000 ft. (0-3048 m.)
Storage 0-50,000 ft. (0-15240 m.)
* ISO (International Standards Organization) and AAMVA (American Association of Motor Vehicle
Administrators).
4