beautypg.com

2 operating status, 3 closing the housing, 8 maintaining and cleaning – Videotec PUNTO HI-PoE User Manual

Page 10: 1 window and plastic cover cleaning, 9 disposal of waste materials, 2 operating status 7.3 closing the housing

background image

EN - English - I

nstruc

tions manual

8

MNVCHEEPOE_1407_EN

7.2 Operating status

The LEDs shown in the figure allow to check the

product's operating status.

LD3

LD1

LD2

Fig. 13

Refer to the table to identify the operating status.

OPERATING STATUS

LED

LED Status Apparatus Status

LD1 (Ca-

mera)

Off

The camera is not connected

On

The camera is correctly powered

1 flashing

The camera has a low identifica-

tion resistance

2 flashings

The camera has a high identifica-

tion resistance

5 flashings

The camera has an excessive

energy consumption

9 flashings

The camera requires more energy

than the available

LD2 (Power

supply)

Off

The device is not powered

On

The device is correctly powered

LD3 (He-

ater)

Off

Heating is inactive

On

Heating is active

Tab. 2

7.3 Closing the housing

Take the dessicant salt bag out of its pack and insert

it into the product. Close the housing as soon as

possible to maintain the dessicant capability of the

salt bag.

8 Maintaining and cleaning

Before doing any technical work on the

device, disconnect the power supply.

8.1 Window and plastic cover

cleaning

Avoid ethyl alcohol, solvents, hydrogenated

hydrocarbide, strong acid and alkali. Such

products may irreparably damage the

surface.

Surface dirt should be rinsed away with water and

then the window cleaned with a neutral soap diluted

with water, or specific products for spectacle lens

cleaning. These should be applied with a soft cloth.

9 Disposal of waste
materials

This symbol mark and recycle system

are applied only to EU countries and not

applied to the countries in the other area of

the world.

Your product is designed and manufactured with

high quality materials and components which can be

recycled and reused.
This symbol means that electrical and electronic

equipment, at their end-of-life, should be disposed of

separately from your household waste.
Please dispose of this equipment at your local

Community waste collection or Recycling centre.
In the European Union there are separate collection

systems for used electrical and electronic products.