Osd navigation – ATEN CS-1754 User Manual
Page 32
CS-1754 / CS-1758 User Manual
24
Please note the following:
The diagram depicts the administrator's Main Screen. The user Main
Screen does not show the F4 ADM function.
OSD always starts in List view, with the highlight bar at the same position
it was in the last time it was closed.
Only the ports that have been set accessible by the administrator for the
currently logged in user are visible (see SET ACCESSIBLE PORTS,
page 31, for details).
OSD Navigation
To dismiss the menu, and deactivate OSD, click the X at the upper right
corner of the OSD Window; or press [Esc].
To Logout, click F8 or the
ZZ
Z
symbol at the top of the Main Screen, or
press [F8].
To move up or down through the list one line at a time, click the Up and
Down Triangle symbols (
) or use the Up and Down Arrow Keys. If
there are more list entries than what can appear on the Main Screen, the
screen will scroll.
To move up or down through the list one screen at a time, click the Up and
Down Arrow symbols (ÏÐ), or use the [Pg Up] and [Pg Dn] keys. If there
are more list entries than what can appear on the Main Screen, the screen
will scroll.
To activate a port, double click it, or move the Highlight Bar to it then
press [Enter].
After executing any action, you automatically go back to the menu one
level above.
cs1754-1758.book Page 24 Friday, July 20, 2007 10:06 AM