ATEN CS-1754 - Manual (Page 11)

1. Introduction
3
Hardware Requirements
Console
Š A VGA, SVGA, or Multisync monitor capable of the highest resolution
that you will be using on any computer in the installation.
Š A USB mouse
Š A USB keyboard
Computers
The following equipment must be installed on each computer:
Š A VGA, SVGA or Multisync card.
Š Either a Type A USB port, or PS/2 keyboard and mouse ports (see the
Cables discussion, below).
Cables
Only ATEN's CS Custom KVM cable sets, which are specifically designed to
work with these switches, may be used.
Depending on the KVM cable type, the switches can link to computers that use
PS/2 connectors to transfer keyboard and mouse data as well as computers that
use USB connectors (see the installation diagrams on page 13).
To purchase CS Custom KVM cable sets, contact your dealer.
Function Length CS Part Number
PS/2 KVM 1.2m 2L-5301P
1.8m 2L-5302P
3.0 2L-5303P
USB KVM 1.2m 2L-5201U
1.8m 2L-5202U
3.0m 2L-5203U
cs1754-1758.book Page 3 Friday, July 20, 2007 10:06 AM