ATEN CS-1754 - Manual (Page 18)

CS-1754 / CS-1758 User Manual
10
Rack Mounting
The CS-1754 / CS-1758 can be mounted in a 1U system rack. To rack mount
the unit, do the following:
1. Remove the stacking brackets by unscrewing them from the unit, as shown
in the diagram, below:
2. Screw the mounting brackets into the sides of the unit, as shown in the
diagram, below
Note: The mounting brackets can screw into either the front or the back of
the unit so that it can attach to the front or the back of the rack.
3. Slide the unit into the rack and secure it to the rack.
Phillips hex head
M3 x 8
cs1754-1758.book Page 10 Friday, July 20, 2007 10:06 AM