ATEN CS-1754 - Manual (Page 15)

1. Introduction
7
No. Component Description
1 Firmware
Upgrade Port The Firmware Upgrade Cable that transfers the firmware
upgrade data from the administrator's computer to the
switch (see page 43), plugs into this RJ-11 connector.
Firmware
Upgrade Reset
Switch During normal operation and while performing a fimware
upgrade, this switch should be in the NORMAL position.
See Firmware Upgrade Recovery, page 48 for details
about the use of this switch.
2 Console Port
Section Ports to plug in your microphone, speakers, monitor,
keyboard and mouse are found here. Each port is marked
with an appropriate icon to indicate itself.
3 KVM Port
Section The cables that link to the computers plug in here. The
shape of these connectors has been specifically modified
so that only cables designed to work with this switch can
plug in (see Cables, page 3, for details).
4 Cable Tie Slot If you want to use a cable tie to gather the cables together,
you can run it through this slot to attach it to the unit.
5 Power Jack The power adapter cable plugs in here.
cs1754-1758.book Page 7 Friday, July 20, 2007 10:06 AM