Kenwood NX-300SE - Manual (Page 8)

v
NOTIFICATION OF WATER-RESISTANT MODEL
Water Resistance and Maintenance (NX-200/ NX-300 Only)
This transceiver conforms to the following standards:
IP67: 7KH,3VWDQGDUGLVWKHSURWHFWLRQOHYHOVSHFLÀHGE\WKH
LQWHUQDWLRQDOVWDQGDUG,(&7KHÀUVWQXPHUDOLQGLFDWHVWKH
“dust-resistant” level and the second numeral indicates the “water-
resistant” level.
PRECAUTIONS
• The applicable standards listed above do not assure that the
transceiver can be used in water. The transceiver may be
damaged in a situation in which the maximum depth is over
1 meter or the maximum submersion time exceeds 30 minutes.
• Observe the following precautions to maintain the transceiver’s
water-resistant performance:
a) Do not drop or apply strong physical shocks to the transceiver.
b) When you disassemble the transceiver or open the cover
of the option board, IP67 will no longer be maintained. After
disassembling the transceiver or opening the cover of the
option board, if you want to continue maintaining IP67, contact
your dealer or Authorized Service Center.
c) Do not soak the transceiver in water that contains a solvent or
surfactant, such as detergent or alcohol.
• If it is soaked in muddy water or salt water (including sea water),
LWPD\EHFRPHFRUURGHG,PPHGLDWHO\ÁXVKZLWKIUHVKZDWHUDQG
then wipe dry with a soft cloth.
• If water is splashed onto the microphone, the battery, or the
antenna terminal, clean and dry them with a soft cloth before
reconnecting to the transceiver.
• When water gets into the microphone opening or the speaker
grill, the voice level may become low or distorted. Lightly shake
WKHWUDQVFHLYHUWRUHPRYHWKHZDWHUIURPWKHVSHDNHUDQGRU
microphone before operating the transceiver.
‡ 8VHRIDQ\RSWLRQRQWKHWUDQVFHLYHUQRWVSHFLÀHGE\Kenwood,
may reduce or void the water resistant and dust resistant
performance.
• When using an option with the transceiver, ensure that it
corresponds with the IP67 standard.