Kenwood NX-300SE - Manual (Page 13)

2
PREPARATION
INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK
Note:
X For battery pack charging procedures and useage, refer to the
battery charger Instruction Manual.
X Before charging a battery pack that is attached to the
WUDQVFHLYHUHQVXUHWKDWWKHVDIHW\FDWFKLVÀUPO\FORVHG
X While operating the transceiver using a Li-ion battery pack in
DUHDVZLWKDQDPELHQWWHPSHUDWXUHRI²ƒ&ƒ)DQGORZHU
operating time may be shortened.
INSTALLING THE (OPTIONAL) ANTENNA
6FUHZWKHDQWHQQDLQWRWKH
connector on the top of the
transceiver by holding the
antenna at its base and turning
LWFORFNZLVHXQWLOVHFXUH
1
2
3
Optional
antenna
1 Match the guides of the
EDWWHU\SDFNZLWKWKHJURRYHV
on the upper rear of the
WUDQVFHLYHUWKHQÀUPO\SUHVV
the battery pack in place.
2 Lock the safety catch to
prevent accidentally releasing
the battery pack.
3 To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
EDWWHU\SDFNDZD\IURPWKH
transceiver.