Kenwood NX-300SE - Manual (Page 25)

Q Making Individual Calls (Digital) (NX-200/ NX-300 Only)
,IDNH\KDVEHHQSURJUDPPHGZLWKIndividual or
Individual + Status
\RXFDQPDNHFDOOVWRVSHFLÀF
persons.
1 Press the key programmed as Individual or
Individual + Status.
2 Press to select a unit ID from the list.
• On keypad models, you can enter a unit ID directly.
3 Press and hold the PTT VZLWFKWRPDNHWKHFDOO
• 6SHDNLQWRWKHWUDQVFHLYHUDV\RXZRXOGGXULQJDQRUPDO
transmission.
RECEIVING
Select the desired zone and channel. If signaling has been
SURJUDPPHGRQWKHVHOHFWHGFKDQQHO\RXZLOOKHDUDFDOORQO\
if the received signal matches your transceiver settings.
Note: 6LJQDOLQJDOORZV\RXUWUDQVFHLYHUWRFRGH\RXUFDOOV
7KLVZLOOSUHYHQW\RXIURPOLVWHQLQJWRXQZDQWHGFDOOV5HIHUWR
“
6,*1$/,1*” on page 27 for details.
Q Receiving Group Calls (Digital)
When you receive a group call on a Conventional channel
and the received group ID matches the ID set up on your
transceiver, you can hear the caller’s voice.
When you receive a group call on a Trunking channel, the
WUDQVFHLYHUDXWRPDWLFDOO\VZLWFKHVWRWKHFRPPXQLFDWLRQV
channel to receive the call.
Q Receiving Individual Calls (Digital)
:KHQ\RXUHFHLYHDQLQGLYLGXDOFDOODULQJLQJWRQHZLOO
VRXQGDQGWKHFDOOHUҋV,'ZLOODSSHDURQWKHGLVSOD\1;
1;2QO\7RUHVSRQGWRWKHFDOOSUHVVDQGKROG
the PTT
VZLWFKDQGVSHDNLQWRWKHWUDQVFHLYHUDV\RXZRXOG
during a normal transmission.