Kenwood NX-300SE - Manual (Page 40)

29
4 :KLOHDGMXVWLQJWKHOHYHOVSHDNLQWRWKHKHDGVHW
PLFURSKRQHWRWHVWWKHVHQVLWLYLW\OHYHOQRWWUDVPLWWHGGXULQJWKLVWHVWSURFHGXUH
‡ :KHQVRXQGLVUHFRJQL]HGWKH/('OLJKWVRUDQJH
5 Press to save the setting.
Q VOX Operation
1 Connect the headset to the transceiver.
2 Press and hold the key programmed as VOX for
2 seconds.
3 To transmit, simply speak into the microphone.
• The transceiver recognizes sound levels depending on
WKH92;*DLQOHYHO,ILWLVWRRVHQVLWLYHLWZLOOWUDQVPLW
ZKHQWKHUHLVQRLVHLQWKHEDFNJURXQG,ILWLVQRWVHQVLWLYH
HQRXJKLWZLOOQRWSLFNXS\RXUYRLFHZKHQ\RXEHJLQ
speaking.
4 :KHQ\RXÀQLVKVSHDNLQJWUDQVPLVVLRQHQGV
5 To turn the VOX function OFF, press and hold the VOX
key again, for 2 seconds.
Note: ,IDVSHDNHUPLFURSKRQHLVFRQQHFWHGWRWKHWUDQVFHLYHU
ZKLOH92;LV21DQGWKH92;*DLQ/HYHOLVVHWWRDVHQVLWLYH
level, louder received signals may cause the transceiver to
transmit.