Kenwood NX-300SE - Manual (Page 44)

PTT ID
377,'LVWKHWUDQVFHLYHUXQLTXH,'FRGHZKLFKLVVHQWHDFK
time the PTT
VZLWFKLVSUHVVHGDQGRUUHOHDVHG
Note: PTT ID can be made only in analog operation.
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
VOICE RECORDER
7KHYRLFHUHFRUGHUDOORZV\RXWRUHFRUGFRQYHUVDWLRQVDQG
create voice memos.
Q Auto Recording (NX-200/ NX-300 Only)
,IDFWLYDWHGWKHDXWRUHFRUGHUZLOOFRQWLQXRXVO\UHFRUGDOO
transmitted and received signals. The recording storage
DUHDUHWDLQVRQO\WKHODVWVHFRQGVRIUHFRUGLQJ
Q Voice Memos (NX-200/ NX-300 Only)
To record a voice memo for later playback:
1 Press the key programmed as Voice Memo, press and
hold the key programmed as Playback, or access the
0HQX^SDJH`
‡ 7KHGXUDWLRQRIUHFRUGLQJPHPRU\ZLOODSSHDURQWKH
GLVSOD\DQGEHJLQFRXQWLQJGRZQ
2 Speak into the microphone to record your memo.
3 Press to end the recording and store it in memory.
‡ ,IWKHPHPRU\EHFRPHVIXOOUHFRUGLQJZLOOVWRSDQGWKH
YRLFHPHPRZLOOEHVWRUHGLQPHPRU\
Q Auto Reply Message (NX-200/ NX-300 Only)
You can set the transceiver to automatically respond to
,QGLYLGXDO&DOOVZKLOHXVLQJ)OHHW6\QF1;'1
1
Press the key programmed as Auto Reply Message to
enter Auto Reply Message mode.