AMD N2PAP-LITE - Manual (Page 34)

31
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
PC Health Status
Item Help
Shutdown Temperature Disabled
Show PC Health in Post Enabled
Current System Temperature 25
°C
Current CPU Temperature 38
°C
Current CPUFAN Speed 5000 rpm
Current SYSFAN1 Speed 5000 rpm
Current SYSFAN2 Speed 5000 rpm
Vcore 1.78V
Vcc3.3 3.31V
+ 5V 4.98V
+12V 12.22V
-12V -12.36V
VBAT(V) 3.21V
5VSB(V) 5.02V
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Shutdown Temperature
This item can let you set the Shutdown temperature. When CPU temperature is over this
setting, the system will automatically shutdown to protect CPU.
Show PC Health in Post
When Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN speed.
Detect CPUFAN in Post
When Enabled, system will send warning message if CPU fan is not functioning.