AMD N2PAP-LITE - Manual (Page 27)

24
Typematic Rate (Chars/Sec)
Sets the number of times in a second to repeat a keystroke when you hold the key down.
The settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held before it begins to repeat the keystroke. The
settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit the access to the system and Setup, or just to Setup.
System The system will not boot, and the access to Setup will be denied if the
correct password is not entered at the prompt.
Setup (default) The system will boot, but the access to Setup will be denied if the
correct password is not entered prompt.
OS Select For DRAM > 64MB
Allows OS2® to be used with >64MB or DRAM. Settings are Non-OS2 (default) and OS2.
Set to OS2 if using more than 64MB and running OS2®.
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Advanced Chipset Features
Item Help
System Performance Standard
X CPU Interface Optimal
X T(RAS) 6
X T(RCD) 3
X T(RP) 3
X CAS Latency 2.5
AGP Aperture Size 64M
AGP 8X Support Enabled
AGP Fast Write Capability Enabled
System BIOS Cacheable Disabled
Video RAM Cacheable Disabled
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults