AMD N2PAP-LITE - Manual (Page 16)

13
(5) Parallel Port Connector (25-pin female): LPT
Parallel port connector is a 25-pin D-subminiature receptacle connector. The onboard
parallel port can be disabled through the BIOS SETUP. Please refer to Chapter 3
“INTEGRATED PERIPHERALS SETUP” section for more detail information.
(6) Audio Connector : AUDIO_PORT/AUDIO_GAME
Audio port uses a connector with 3 phone jacks for LINE-OUT, LINE-IN and MIC.
The 15-pin D-subminiature receptacle connector is connection of joystick/MIDI device
LINE_O :
Audio output to speaker(Front Speaker on 6-channel)
LINE_I : Audio input to sound chip(Rear Speaker on 6-channel)
MIC : Microphone Connector (Center-Base Speaker on 6-channel)
GAME: Joystick/MIDI Port Connector
(7) Serial Port COM1, COM2A : COM1, COM2A
COM1 and COM2A are with the 9-pin D-subminiature male connectors. The onboard
serial port can be disabled through BIOS SETUP. Please refer to Chapter 3
“INTEGRATED PERIPHERALS SETUP” section for more detail information.
(8) Floppy Drive Connector (34-pin block): FDD
This connector is for floppy drive ribbon cable connection. Connect the cable end with
twisted stripe to floppy drive and other end of cable to the motherboard.
Pin 1
Floppy Drive Connector
PS/2
Mouse
COM1 COM2A PS/2
Keyboard
USB
LINE-OUT
LINE-IN
MIC
PRINT GAME/MIDI PORT LAN