Freezer calendar, Ice pack, Ice cube tray – Siemens GS29NVW30 User Manual
Page 33: En 33
en
33
Note
If too much drinking water is added,
the function of the ice maker may be
impaired. The ice cubes cannot
be removed individually from the ice
tray. Too much drinking water was
added and is running into the storage
container, causing any ice cubes
to freeze together.
2. Pour drinking water into the filler
opening.
3. Re-insert water container.
4. When the ice cubes are frozen, press
lever down and release.
The ice cubes loosen and fall into
the storage container.
5. Pull out storage container and remove
ice cubes.
Freezer calendar
Fig. )/A
To prevent the quality of the frozen food
from deteriorating, do not exceed the
storage duration. The storage period
depends on the type of produce. The
figures next to the symbols indicate
the permitted storage period of
the produce in months. In the case
of commercially available frozen food
observe the date of manufacture or use-
by date.
Ice pack
Fig. )/B
If a power failure or malfunction occurs,
the ice packs can be used to slow down
the thawing process. The longest
storage time is obtained by placing
the ice pack on the food in the top
compartment.
To save space, the ice pack can be
stored in the door compartment.
The ice packs can also be used to cool
food temporarily, e.g. in a cold bag.
Ice cube tray
Fig. *
1. Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
2. If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
3. To loosen the ice cubes, twist the ice
tray slightly or hold briefly under
flowing water.