Notifier RP-2002C - Manual (Page 3)

Canadian DN-60444:B1 • 12/22/11 — Page 3 of 4
Product Line Information
RP-2002C: Six-zone, 24 volt Agent Release Control Panel
(includes backbox, power supply, technical manual, and a
frame & post operating instruction sheet) for single and dual
hazard agent releasing applications.
N-CAC-5X: Class A Converter Module can be used to convert
the Style B (Class B) Initiating Device Circuits to Style D
(Class A) and Style Y (Class B) Output Circuits to Style Z
(Class A).
NOTE: Two Class A Converter modules are required to convert all
four Output Circuits and six Initiating Device Circuits.
4XTM: Transmitter Module provides a supervised output for
local energy municipal box transmitter and alarm and trouble
reverse polarity. It includes a disable switch and disable trouble
LED.
N-ANN-LED: Built-in Annunciator Module provides three
LEDs for each zone: Alarm, Trouble and Supervisory. Super-
visory red or black enclosure (see DN-60242).
N-ANN-RLY: Relay Module, which can be mounted inside or
outside the cabinet, provides 10 programmable Form-C relays.
(See DN-7107.)
ANN-SEC: Optional card for a secondary ANN-BUS. See
53944.
TR-CE: Trim-ring (red) is available as an option. The trim-ring
allows semi-flushing mounting of the cabinet.
BB-26: Battery box, holds up to two 26 Amp Hour batteries
and CHG-75.
NFS-LBBR: Battery box, houses two 55 Amp Hour batteries,
red.
SEISKIT-COMMENC: Seismic mounting kit; required for seis-
mic-certified installations.
BAT Series Batteries: Refer to DN-6933.
PRN-6F: UL-listed compatible event printer. Dot-matrix, trac-
tor-fed paper, 120 VAC.
PRT-PK-CABLE: Programming cable. Used to update the
FACP’s flash firmware. (Also requires an RS485 to RS232
converter).