High Country Tek HGC-2, Closed Loop Controller - Manual (Page 9)

Hydraulic Generator Controller – HGC-2
9
‘Help’ Menu Options :
The ‘Help’ menus has two drop down options:
1.
Print Parameters
2. View Help.
3. About Controller.
‘ Print Parameters ’ when clicked, this
option will allow the user to get a hard copy
of the controller settings via the default
printer connected to the PC
‘ View Help ’ when clicked, will open a PDF
format file that is the complete manual for
the HGC-2 controller, allowing local on-site
information support for the user.
‘ About Controller ’ when clicked, will open
another window that will show the user
relative information on the controller model,
Firmware, GUI and communications
versions as well as contact information
and web address for support.
Click ‘OK’ to exit the window.
’QUIT’ Menu Options :
The ‘Quit’ menu options:
1.
Quit.
‘
Quit
’ when clicked, close the Graphical User
Interface (GUI) correctly and release any USB
communications ports that may have been used
for set-up, allowing other programs to use these
resources.
NOTE:
It is important to note that if the quit is clicked
before the ‘Send Changes’ button, the GUI will
close and the controller will default to the
previous settings stored in the internal memory
with no user changes taking place.