High Country Tek HGC-2, Closed Loop Controller - Manual (Page 10)

Hydraulic Generator Controller – HGC-2
10
Controller Setting Security - Passwords :
Password Protection:
The password is entered after first
clicking the ‘Password’ tab on the index
bar of the ‘dashboard’ screen, This
opens another window where the
password is entered.
NO Password
– User Level:
This level allows the user to only
observe operation but not make any
changes to the parameter settings or
operation of the controller.
OEM level:
This level allows the equipment OEM access to all settings and controller functions.
NOTE:
Passwords may be obtained by contacting High Country Tek, Inc, sales and support department
‘File’ Menu Options :
The ‘File’ menus has two drop down options:
1.
Read File.
2. Save File.
‘ Read File ’ when clicked, will allow the user
to look for previously saved HGC-2 setting
profiles and up-load these into the PC and
then into any HGC-2 controller.
IMPORTANT NOTE:
When editing the default data file that comes
with the controller, ensure that you choose the
correct file name for the model of HGC-2
ordered and used.
‘ Save File ’ when clicked, Allow the user to save to PC hard drive the
setting file for an HGC-2 controller. This feature is used to store
different generator model profiles that can be retrieved quickly at any
time as required
For example: Use data file name "HGC-2-
12.dat“ for the "HGC-2-12“