High Country Tek HFS - Manual (Page 4)

Hydraulic Fan System Controller: HFS
 Fail safe design gives full fan cooling even with NO electrical power
 Wide supply voltage range ( 10 – 32VDC )
 Industry standard Deutsch 12 pin connector DT15-12PA.
 User settings inputted via provided software package – NO software to be written.
 Set-up & unit configuration up/downloadable to any backup media via PC.
 NO external adjustments to maintain system integrity in the field.
 Three independently selectable and configurable temperature sensing inputs
 Two on/off „override‟ switch inputs for full cooling if required.
 ALL Inputs and Outputs fully protected ( shorts, opens and reverse connection ).
 Unit status „Diagnostic‟ LED‟s user visible and functional at all times.
 Coded error indicator for real time diagnostics at the controller.
 Full remote (PC) and local „smart‟ visual diagnostics ( with optional Opto 3000 ).
 Product integrity maintained under extreme operational environments.
 Fully „isolated‟ design for improved safety and ease of application in difficult areas.
 Very cost effective compared to other available modules with comparative functions.
 Ruggedized‟ design allowing use on either in-cab or external applications.
 Flame retardant resin encapsulation.
 Mount „anywhere‟ mechanically hardened modular format.
Product Features :
4
The information in this guide is the intellectual property of High Country Tek, Inc. and should be
considered at all times as strictly company confidential.
It shall not be copied or transmitted by any format to any third parties without our knowledge and
express written permission.