AMETEK 7100 Leak Detect Stik - Manual (Page 20)

18
EC Declaration of Conformity
Manufacturer: AMETEK Automation & Process Technologies
6380 Brockway Road, Peck, MI 48466 USA
Identification of Equipment:
7100 Stik Series Liquid Level Transducer
Description of Device:
The device is a permanently mounted liquid level probe. It determines the level of a liquid based on
signal reflections, caused by magnetic floats, in a wire running the length of the probe. These signals are
amplified and processed, then relayed via a signal imposed on the input wires to the probe. The probe
body and tube may be constructed of stainless steel or of a flexible PVDF polymer. These devices also
take liquid level temperature measurements using thermistors located inside the probe tube.
EC type certificate: DEMKO (0539) 09ATEX0902049X
Lyskaer 8, P.O. Box 514, 2730 Herlev, Denmark
Conformity Specifications: models 7100 M/R: II 1 G Ex ia IIB T4 Ga Ta: -40ºC to +70ºC
models 7100 K/V: II 1 G Ex ia IIA T4 Ga Ta: -40ºC to +70ºC
Council Directives:
Directive 94/9/EC, ATEX
Directive 89/336/EEC, EMC
Harmonized Standards:
EN60079-0:2012
Electrical apparatus for explosive gas atmospheres - Part 0:
General requirements
EN60079-11:2012
Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic
safety "i"
EN60079-26:2007
Explosive atmospheres – Part 26:
Construction, test and marking of group II category I G electrical
apparatus
EN61010-1:2010
Safety Requirements for Electrical Equipment for Measurement,
Control, and laboratory Use
Other Standards:
EN55011:1998
Limits and methods of measurement of radio characteristics of
industrial, scientific and medical (ISM) Radio Frequency equipment,
Class B, Group 1
EN50082-1:1992
Electromagnetic compatibility Generic immunity standard Part 1.
Residential, commercial and light industry
IEC 801-2:1984 ESD Susceptibility
IEC 801-3:1984 Radiated Susceptibility, Electromagnetic Field
IEC 801-4:1988 Conducted Susceptibility, Burst Interference Transients
Signed:
Name: Glenn S. Loding Dated: 10/25/13
Position: Engineering Manager Company: AMETEK Automation & Process Technologies