AMETEK 7230 HT Digital Probe - Manual (Page 24)

22
Notes
Part Number
Serial Number
Purchase Order Number
Sales Order Number
Comments
.
Section 5 - Equipment Return
Contact your Distributor before returning equipment to the factory.
In order to provide prompt and reliable service, any equipment being returned for repair or credit, must be pre-
approved by the factory. For all UPS shipments, notify your driver and the UPS offi ce immediately. You must fi le a
claim with UPS as soon as possible. Then advise H&R Mfg. and Supply for reshipment, etc. Keep damaged goods
and shipping containers for UPS inspection. UPS must inspect damage if claim is to be processed.
For all Common Carrier shipments, damage must be reported on the delivery receipt and the claim fi led at the
destination. Be sure to check your order very carefully upon arrival.
You must have a Returned Material Authorization Number! To obtain a Returned Material Authorization
(RMA#), contact your distributor.
Please provide the following information:
•
Model Number of returned equipment
• Serial Number
• Original Purchase Order Number
• Detailed description of the failure
• Contact Name and Phone Number
In many applications, the probes are exposed to hazardous materials. It is your responsibility to fully disclose all
chemicals and decontaminate the entire product.
• OSHA mandates that our employees be informed and protected from hazardous chemicals.
• A Material Safety Data Sheet (MSDS) listing any hazardous material to which the probe has been exposed MUST
accompany any return.
Section 6 - Warranty
All AMETEK APT electronic level instruments are warranted to be free of defects in materials or workmanship for one
full year from the date of original factory shipment.
If returned within the warranty period, and upon factory inspection to determine whether the cause of the claim is
covered under the warranty, AMETEK APT will repair or replace the instrument at no cost to the purchaser (or owner),
other than transportation.
AMETEK APT shall not be liable for misapplication, labor claims, director or consequential damage or expense
arising from the installation or use of the equipment. There are no other warranties expressed or implied. A complete
description of the product warranty is contained in the Terms and Conditions of Sale.