HighPoint RocketRAID 2314 - Manual (Page 85)

Mac OSX Driver and RAID Management Software
To rescan the devices:
1) Select menu “Manage - Device”.
2) Click “Rescan Devices” button.
Note: When you are hot-plugging an entire array, run rescan only after all array
members (hard disks) have been physically plugged or unplugged from the system.
You can rescan all the devices at once using the Rescan function on the Array
Management page.
5 Configuring Spare Disks
To configure spare disks attached to the RocketRAID card, select the “Manage -
Spare” function. The Spare Pool Management page will be displayed.
7-10