HighPoint RocketRAID 2314 - Manual (Page 80)

Mac OSX Driver and RAID Management Software
7) Select disks from the Available Disks list.
8) Enter a capacity for the array, or use the default value (the maximum capacity for
the array).
9) Click Create. If you have specified an initialization option, the initialization
process will start automatically.
Deleting an Array
To delete an array:
1) Select “Manage - Array” from the menu.
2) Click on the Maintenance button. An Array Information window will appear.
3) Click the Delete button.
Note: An array in use by the operating system cannot be deleted. Any data stored on
a deleted array will be inaccessible
Adding Disks to an Array
When an array member in a redundant array fails, the array will be listed as broken. A
broken array will be automatically rebuilt using available-spare disks. However, if you
have no spare disks configured, you can still rebuild by manually adding an Available
Disk to the array. To add a disk to a broken array:
1) Select menu “Manage - Array”.
2) Click the Maintenance button.
3) Click the Add Disk button.
7-5