HighPoint RocketRAID 3510 - Manual (Page 74)

Example: Add the following line to instruct the system to mount /dev/da1s1e to
location /mnt/hpt after startup:
/dev/da1s1e /mnt/hpt ufs rw 0 0
3 - Updating the Driver
To update the driver with a newer revision, simply reinstall the driver following the
steps discussed in the previous section, “Install the driver on an existing system”.
4 - Uninstalling the Driver
The driver can only be uninstalled when the system is not booting from devices
attached to the RocketRAID host adapter. To uninstall, remove the line
hptiop_00_load=”YES” located in /boot/defaults/loader.conf, and then delete the
driver module /modules/hptiop_00.ko or /boot/kernel/hptiop_00.ko.
FreeBSD Driver Support
7-7