Clrs command, Whis command, Clrs command whis command – Vaisala FD12P User Manual
Page 78: The system output is the following
User's Guide _______________________________________________________________________
78
______________________________________________________ M210296en-A
When you type
PRW
↵
the system output is the following:
PRESENT WEATHER
MODERATE DRIZZLE
VISIBILITY
7161 m
AVE 10 MIN
7533
RAIN INTENSITY
0.16 mm/h
CUMULATIVE SUM
12.16
SNOW INTENSITY
0.0 mm/h
CUMULATIVE SUM
0
TEMPERATURE
2.7
TS
1.8
DRD SUM
22.04
CLRS Command
The CLRS command resets (to 0.00) the cumulative sums of
precipitation. This resetting can also be done in the protocol mode by
the host computer, using the following command format:
Then the FD12P responds to the accepted command with the
following ASCII character:
(06 hex)
WHIS Command
The WHIS command displays the instant precipitation type codes
(NWS) for one hour.
Type
WHIS
↵
to get the results shown on the next page.
PRW HISTORY
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R
R
R
R
R
R
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R
R
R
R
R
R
R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R- R-
>