Posey Bed 8070 - Manual (Page 8)

8 Posey Bed - 8070
9. Tighten with a 9/16” wrench (Fig. 2-G).
DO NOT over tighten.
10. Repeat until all four square plugs have been
installed.
7. Place a lock washer on a 1” bolt (Hardware
Packet C) and insert it into a square plug with
channel fitting (Fig. 2-E).
8. Put the plug and bolt into the hole on top of
the caster leg frame using the square plug and
receiver (Fig. 2-F).
J
P
Fig. 2-G
Fig. 2-F
1” Bolt Square Plug
Locking
Washer
Fig. 2-E
1” Bolt
Square Plug
Locking
Washer
Bed Assembly