Posey Bed 8070 - Manual (Page 14)

14 Posey Bed - 8070
4. Repeat with the other long foam pad on the
other side (Fig. 6-B).
5. Open the slot on a long foam pad (Part F) and
wrap around on any of the vertical leg posts
(Fig. 6-C).
Make sure that the slot faces
outward from the bed frame.
6. Repeat on the other three vertical posts until
all are padded.
Foam Pad Assembly
Materials:
• Parts E (2), F (8)
1. Open the slot on a short foam pad (Part E) and
wrap around the short rail at either the head or
foot or the bed (Fig. 6-A).
NOTE: Make sure that the slot faces outward from
the bed frame.
2. Repeat with the other short foam pad on the
other side of the bed (Fig. 6-A).
3. Open the slot on a long foam pad (Part F-2
each) and wrap two pads around either long rail
(Fig. 6-B).
NOTE: Make sure that the slot faces outward from
the bed frame.
Fig. 6-C
F
Fig. 6-B
G
F
Fig. 6-A
E
L
Bed Assembly