Posey KeepSafe® Essential - Manual (Page 13)

KeepSafe ® Essential 13
Connecting to AC Power (Optional)
The Posey KeepSafe Essential is equipped with a DC jack to allow you
to use AC power to power the alarm. An optional AC power adapter
(Cat. 8383) is required. To ensure proper alarm function and to prevent
damage to the alarm, only use the AC power adapter supplied by Posey.
To Connect to AC Power:
1. Connect the AC power adapter to the KeepSafe Essential (fig. 8).
2. Plug the other end into the wall.
NOTE: The Posey KeepSafe Essential will accept both alkaline or
rechargeable batteries. However, connecting the alarm to AC power
does not charge the rechargeable batteries. This is a safety feature to
prevent potential battery damage if the wrong type of batteries are
inserted while the alarm is connected to AC power.
Only use the Posey aC power adapter (Cat. 8383) to power your alarm. Using an adapter
other than the Posey adapter may damage the alarm and void the warranty.
If power is interrupted, the alarm will not function. There is no alarm at bedside.
If aC power is off for more than four (4) minutes, the alarm settings will revert to factory default.
9VDC
aC POWER
aDaPTER
RECEPTaCLE
Fig. 8